ZL-2 steam air heater is consists of 7
parts: steel-aluminum radiator fin tube + electric steam valve + drain valve +
insulation box + fan+ Fresh air damper + electric control system. It
is specially designed to support the left and right circulation drying room.
For example, the 100,000 kcal model drying room, it is equipped with 6 fans,
three on the left and three on the right. When the three fans on the left
rotate clockwise, the three fans on the right rotate counterclockwise in a
cyclic alternating manner, forming a relay, The left and right sides serve as
air inlets and outlets alternately, taking out all the heat generated by steam
heater. It is equipped with an electric fresh air damper to supplement fresh
air in coordination with the dehumidification system in the drying room/drying
place.
Advantages/features
1. Simple
structure and easy installation
2. Large air
volume and small wind temperature fluctuation
3. Steel-aluminum
finned tubes, high heat exchange efficiency. The base tube is made of 8163
seamless tube which is pressure-resistant and durable;
4. Electric steam valve controls the amount of inlet, automatically
cuts off or opens according to the set temperature, so that can accurately
controls the temperature.
4 .High-density
fire-resistant rock wool insulation box to avoiding heat loss
6. High temperature and high humidity resistant fan with IP54 protection rating
and H-class insulation rating.
7. left and right
fans run alternately in cycles to ensure even heating
8. Automatically replenish fresh air
